AMBER HR Active
The AMBER HR active is identical to the AMBER active except the larger cabinet size which physically matches with the BLACK tv HR active, VIOLETT HR active, BLUE HR active and OWL-System.
Due to the larger cabinet dimensions, the AMBER HR active has a 6 Hz lower system frequency.
Both AMBERS reach a very low -3dB point, because we use a 10-inch dual coil driver which is capable of moving its membrane by ±15mm.
Drivers: LF= 10 inch dual coil, long excursion
FC response: 32 - 2.000 Hz (±2.0 dB 32 - 200 Hz) |
| System |
AMBER HR |
| Construction |
bass-reflex |
| Concept |
long excursion woofer - active |
| fc response free field |
38 - 2,000 Hz +/- 8 dB |
| fc reponse filtered |
38 - 80/150 Hz +/- 1.5 dB |
| system low fc response |
36 Hz - 3 dB |
| max. sensitivity |
112 dB |
| max. sensitivity long term |
109 dB |
| harmonic distortion at SPL <100Hz |
0.8 % |
| harmonic distortion at SPL >100Hz |
0.4 % |
| Bass driver |
1 x 10" Paper/Fiberglas |
| Midrange driver |
- |
| Hf driver |
- |
| shielded (anti magnetic) |
- |
| weight |
63 lbs |
| dimensions w/h/d in mm |
15" X 19" X 13.75" |
| pair difference |
- |
| Electronic |
AMBER HR |
| number of amplifier |
4 |
| power handling rms Lf/Hf |
4X80 W |
| power handling peak Lf/Hf |
4X90 W |
| connector type |
3 XLR (female)/ 3 XLR (male) |
| input impedance |
10 kOhm |
| input sensitivity |
16 steps, from 0.45 - 4.5V |
| X-over fc |
off/80/150 Hz |
| low pass filter |
15 Hz/-18dB |
| polarity control |
2 steps, in phase - out of phase |
| phase control |
5 steps, from 30 - 150 degree |
| distortion at acoustic max. output |
0.1% |
| signal to noise ration |
-100 dB |
| kind of power supply |
analog |
| operating voltage |
115/230 V +/- 20% |
| power consumtion at max. output |
360 W |
|
used for:
- RECORDING
- PROJECT STUDIO
- FILM/VIDEO Editing
- MASTERING
- SOUND-Design
extends fc- responce and acoustic output of our 2 way systems.
used as .1 channel in 5.1 SURROUND SOUND systems |
KOBALT